Email:

HPx-346 Link Setting Tool

Select the appropriate signal characteristics for your radar and this tool will highlight which links should be set on the HPx-346 card.

Hover over a link to see its number. This tool is for guidance only and you should consult the HPx-346 user manual too.

Video A
  • Impedance
  • 50 Ohm
  • 75 Ohm
  • High Z
Trigger
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Open Collector
  • Differential (RS-422)
ACP
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Open Collector
  • Differential (RS-422)
ARP
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Open Collector
  • Differential (RS-422)
SIG1
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Open Collector
  • Differential (RS-422)
HPx links Links JP1 (Top) JP1 (Bottom) JP8 (Right) JP8 (Left) JP11 (Right) JP11 (Left) JP9 (Right) JP9 (Left) JP10 (Top) JP10 (Centre) JP10 (Bottom) JP12 JP13 (Right) JP13 (Left) JP16 (Right) JP16 (Left) JP14 (Left) JP14 (Right) JP15 (Top) JP15 (Centre) JP15 (Bottom) JP17 JP18 (Right) JP18 (Left) JP21 (Right) JP21 (Left) JP19 (Left) JP19 (Right) JP20 (Top) JP20 (Centre) JP20 (Bottom) JP22 JP23 (Right) JP23 (Left) JP26 (Right) JP26 (Left) JP24 (Left) JP24 (Right) JP25 (Top) JP25 (Centre) JP25 (Bottom) JP27 JP2 (Bottom) JP3 (Bottom) JP4 (Top)