Email:

HPx-300 Link Setting Tool

Select the desired output signals and this tool will highlight which links should be set on the HPx-300 card.

Hover over a link to see its number. This tool is for guidance only and you should consult the HPx-300 user manual too.

Trigger
  • Signal Type
  • Single-Ended
    • Voltage
    • 5V
    • 12V
    • 30V
  • Differential (RS-422)
ACP
  • Signal Type
  • Single-Ended
    • Voltage
    • 5V
    • 12V
    • 30V
  • Differential (RS-422)
ARP
  • Signal Type
  • Single-Ended
    • Voltage
    • 5V
    • 12V
    • 30V
  • Differential (RS-422)
SHM
  • Signal Type
  • Single-Ended
    • Voltage
    • 5V
    • 12V
    • 30V
  • Differential (RS-422)
HPx links Links JP7 (Right) JP7 (Left) JP8 (Right) JP8 (Left) JP9 (Right) JP9 (Left) JP10 (Right) JP10 (Left) JP11 (Right) JP11 (Left) JP12 (Right) JP12 (Left) JP17 (Right) JP17 (Left) JP18 (Right) JP18 (Left) JP6 (Top) JP6 (Centre) JP6 (Bottom) JP5 (Top) JP5 (Centre) JP5 (Bottom) JP4 (Top) JP4 (Centre) JP4 (Bottom) JP1 (Top) JP1 (Centre) JP1 (Bottom) Connect Auxiliary Power Auxiliary Power