Email:

HPx-200 Link Setting Tool

Select the appropriate signal characteristics for your radar and this tool will highlight which links should be set on the HPx-200/HPx-200e card.

Hover over a link to see its number. This tool is for guidance only and you should consult the HPx user manual too.

Video A
  • Impedance
  • 75 Ohm
  • High Z
Video B
  • Impedance
  • 75 Ohm
  • High Z
Trigger
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Differential (RS-422)
ACP
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Differential (RS-422)
ARP
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Differential (RS-422)
HPx links Links JP1 JP2 JP3 (Right) JP4 (Right) JP3 (Left) JP4 (Left) JP13 JP27 JP18 JP19 JP20 JP5 (Right) JP6 (Right) JP5 (Left) JP6 (Left) JP14 JP28 JP21 JP22 JP23 JP7 (Right) JP8 (Right) JP7 (Left) JP8 (Left) JP15 JP29 JP24 JP25 JP26